1 Type of Conveyor
PT& ED Line & PVC U/C EMS (Electric Monorail System)
Buffer, Transfer Line Roller machine
Booth & Oven Chain Conveyor
Working area Roller machine
PBS Power & free conveyor
Design Description
Floor skid conveyor for Booth, Working area and Buffer line
Shuttle
Cross transfers designed to move loads horizontally to another
conveyor line.
Cross transfer units have a roller bed and clamping (or stopper)
device on both sides.
The standard speed is designed with double speed, start & stop is
lower speed, in middle will be fast moving.
Roller Beds
Roller bed framework is constructed to accommodate the wide variety
of mounting arrangements which may be required for production
processes. This universal construction design affords easier
interface with turntables, lifts, cross transfers, other conveyors
or production equipment.
The standard speed of the roller beds is 24 m/min in the buffer
storage area, others speed will base on the process requirement to
design.
In the painting booth, oven & station machinery, the speed of the
conveyor is controlled by frequency converter ,its speed could be
adjusted by the production requirement .
Turntables
Automatic or manual-operated turntables can be designed to rotate
the car body 180°, it will fulfill the process requirement .
2-2 EMS (Electrified Monorail System) for PT & ED
EMS consists of independently controlled carriers suspended on an
overhead extruded aluminum track. The system is quiet and
dependable. Each carrier is powered by its own motor and is
equipped with PLC for automatic control of speed and operation. The
motorized carriers respond to programming and automated devices
located along the conveyor path.
In difference all drives are inverter controlled, and an onboard
PLC is used to control the movements along the track.
Floor skid roller conveyors are a modular designed system that
utilizes standard components and offers many options to meet
customer requirements.
Traditional steel chain-driven system will be used in the Booth &
Oven.
Roll bed & Cross transfer system (no-power) will be used in the
Buffer area and Working booth.
